CO2 Beer Gas Primary Bottle Mount Regulator with Shutoff Valve & 7mm Barb

High quality manufactured in Italy by O.D.L. Primary Bottle Mount CO2 Beer Gas Regulator

With Shutoff Valve & 7mm Barbed Nozzle Will Fit 3/8” Outside Diameter MDPE Beer Gas Pipe.

Bottle content gauge - 0 - 250 bar

Max output pressure - 4.5 bar / 65 psi

Twin safety pressure relief valves - 4.8 bar / 69 psi

Max overpressure +20%

Instructions & safety advice included

W21.8 nut for UK & European CO2 pub style cylinders not suitable for mixed gas cylinders.

The regulator can be easily adjusted from 0-20 psi by hand. If you need to go higher simply use a flat head screwdriver.

These are high quality beer regulators they are not cheap unbranded Chinese ones.

Cylinder gases are stored under ever increasing high pressures and can be extremely dangerous, so the regulator needs to be up to the job. Some of the cheap, imported gas regulators on the market have been shown to fail catastrophically in laboratory safety tests.

Our regulators includes twin safety blow-off valves they are specifically designed for beer gas and are manufactured to UK & EU standards.

CO2 regulators should be re-tested every 5 years.

The 7mm barbed nozzle will fit 3/8” outside diameter MDPE beer gas pipe it will also fit 3/16” , 1/4” and 5/16” inside diameter PVC tubing you will need to stand the tubing in boiling water for about 20 seconds.