Ball Lock SS Carbonation Cap & Beer Line Cleaning Cap

This brand new high quality stainless steel carbonation cap does it all.  The comes with several added features one of which is that the cap has been machined in order to fit both the black and grey ball lock disconnects.

This carbonation cap also includes a barb tail on the underside, so you can attach some beer line to act as a dip tube.          

The carbonation cap to be used in several different ways including:

• Carbonate your beverage
• Cleaning your beer line from a simple and cost effective PET bottle
• Use it to counter pressure fill PET bottles

Features:

• Made to fit PET bottles
• Fits Gas and Liquid ball lock disconnects
• Use to carbonate liquid i.e water, beer, soft drink etc
• Use to clean beer lines and save heaps on beer line cleaner

The carbonation cap is highly effective method to add and maintain carbonation in beverages for extended periods of time. Made from stainless steel the carbonation cap will last years of use with virtually no maintenance.

With this cap you can simply fill an old PET bottle with cold liquid of your choice and carbonate by connecting your gas ball lock disconnect. Make your own soda water, carbonate beer, or even make your own soft drinks.

The Carbonator screws to the top of most standard UK 1 and 2 litre PET plastic Pop bottle.  Squeeze the air out then you attach your cornelius soda keg ball lock and CO2 rig and give it a shot and shake!  You can actually watch the CO2 being absorbed by the liquid. 

Application Tip:

For swift carbonation of still beverages such as beer, soda, cider, juice, wine, energy drinks…, the carbonation cap permits the infusion of CO2 with minimal effort.  

To Carbonate:

• Chill the beverage to be carbonated
• Pour the chilled beverage into a clean plastic soda bottle
• Seal the opening with the carbonator cap
• Depress the poppet and squeeze bottle to purge air for interior
• Attach a Gas Ball Lock Disconnect connected to a CO2 Tank
• Set your regulator pressure at 30-40 psi. Do not exceed 40 PSI.
• Introduce CO2 into the bottle
• Remove the Ball Lock Disconnect from the Carbonator cap
• Shake the bottle.

If the CO2 level is not adequate in the beverage, reattach the Gas Disconnect and continue to add CO2 and repeat shaking procedure. When the CO2 stays in suspension and carbonation is complete, begin enjoying the freshly carbonated beverage.

WARNING: Do not use the Carbonator cap with glass vessels.  Glass bottles receiving unsuitable pressure levels can burst and cause injuries. Only use with a proper CO2 regulator. Do not exceed 40 PSI.